JANE Montecarlo R1, Instructions Manual

Page: 23 / 104

C M Y CM MY CY CMY K
MAINTENANCE
8A 8B
8C
Do not expose the cover to sunlight for prolonged periods, and
while the seat is not in use cover it or store in the boot.
Wash the plastic parts with warm, soapy water and then dry all
the components carefully.
The cover can be removed for washing. Follow these instructions:
Remove the cover of your MONTECARLO R1 seat:
• Headrest. Remove the 2 clasps under the sides, unfasten the
strap on the rear part and pull the cover forwards. Finally,
remove the two clasps from the upper part (8a).
•
Backrest. Unfasten the two rear straps and pull the cover
forwards (8b).
•
Booster cushion. Unfasten the clasps on the rear, remove the
elastic from the rear part and pull the cover forwards (8c).
Wash by hand and at a temperature not hotter than 30
°
C.
To put the cover on again, follow the same steps, but in reverse.
english
23