Page 4
- Place the bracket, with the blower relay, in
position by aligning the holes in the bracket
with the holes on the back panel where the
pump relay was mounted. Place the pump relay
over the bracket and use the screws removed
earlier to secure the bracket and the pump relay
to the back panel (see Figure 6).
Figure 3. Remove the Cover of the High Voltage
Assembly
Figure 4. Mount the Blower Relay
Figure 5. Use the Mounting Bracket if the Filter
Pump Relay is Mounted in the High
Voltage Assembly
Figure 6. Mount the Bracket Under the Filter Pump
Relay
