Page 10
NOTE
The laminar jet with LED light operates only on 12
volts AC. A suitable 120-volt/12-volt stepdown AC
transformer MUST be used. Refer to
Section 4.4
of
this manual for further important details.
4.3.2 Wiring to a Time Clock
The laminar jet with LED lights can be wired into a basic
time clock to automatically turn on the laminar jet with
LED lights at a predesignated time. Refer to Figure 8
to connect the laminar jet with LED lights into the time
clock.
4.3.3 Wiring to a Switch
The laminar jet with LED lights can be wired into a switch
to manually turn on/off the lights. Refer to Figure 9 to
connect the laminar jet with LED lights into the switch.
4.4
Twelve (12) Volt Transformer
Installation
The laminar jet with LED lights requires the use of a
120/12VAC-100 watt low voltage lighting transformer.
NOTE
For optimum performance Zodiac Pool Systems,
Inc. recommends using one transformer per 12-
volt laminar jet. However, it is possible to power up
to 4 laminar jets with one 200 watt transformer.
To ensure maximum safety, the transformer used to power
the laminar jet with LED lights must be one that is listed
by a Nationally Recognized Testing Laboratory (NRTL)
for the application.
NOTE
If the pool already has a low voltage transformer
powering the pool and/or spa lights, do not use
the same transformer to power the laminar jet with
LED lights. This is to ensure that the laminar jet’s
LED lights are only turned on when the laminar jet
pump is running.
Black
White
Green
Ground
Neutral
120 VAC
Power Supply
Black
White
Green
JUNCTION
BOX
Laminar Jet
with
LED Light
120V/12V
Transformer
Black
White
Green
Clock
Motor
Ground
Ground
Neutral
Line
A
1
2
Black
White
Green
120 V
SUPPL
Y
Black
White
Green
JUNCTION
BOX
Laminar Jet
with
LED Light
120V/12V
Transformer
Black
White
Green
Ground
Neutral
Line
120 V Supply
Black
White
Green
SWITCH
Black
White
Green
JUNCTION
BOX
Laminar Jet
with
LED Light
120V/12V
Transformer
Black
White
Green
Figure 7. 12-Volt Laminar Jet with LED Light
Wiring Diagram
Figure 8. Wiring the Laminar Jet with LED Light
to a Time Clock
Figure 9. Wiring the Laminar Jet with LED Light
to a Switch
