background image

 WARNING

INSTALLATION AND 

OPERATION MANUAL

H0303700 Rev C

FOR YOUR SAFETY - 

This product must be installed and serviced by a contractor who is licensed and qualified in pool 

equipment by the jurisdiction in which the product will be installed where such state or local requirements exist. The 

maintainer must be a professional with sufficient experience in pool equipment installation and maintenance so that 

all of the instructions in this manual can be followed exactly. Before installing this product, read and follow all warning 

notices and instructions that accompany this product. Failure to follow warning notices and instructions may result in 

property damage, personal injury, or death. Improper installation and/or operation will void the warranty.  Improper 

installation and/or operation can create unwanted electrical hazard which can cause serious injury, property damage, 

or death. 

ATTENTION INSTALLER - 

This manual contains important information about the installation, 

operation and safe use of this product. This information should be given to the owner/operator of this 

equipment.

Jandy Pro Series Levolor

®

 II 

Electronic Water Leveler 

Model K-2000

Power          Sensor          Filling

Electronic

Water Fill

System

The next generation 

in automated controls.

Patented

High Voltage Compartment

No user service parts inside

Model No. K-2000

           High Water      High Water

             Sensor              Pump

II

LEV

olor

Summary of Contents for Levolor II





















Reviews: