Page 39
JXi
™
Gas Conversion / Replacement Instructions
11. Using a short-handled screwdriver, slightly loosen two (2) screws
from the air intake orifi ce.
12. Gently remove the original air intake orifi ce and screen from the
blower air intake (Figure 39).
Figure 39. Replace the Air Intake Orifice
13. Note the exact position of the intake hoses on the old air intake
orifi ce. Remove the intake hoses from the old air intake orifi ce
an install them on the new air intake orifi ce in exactly the same
positions as they were found on the old air intake orifi ce.
14. Replace the new air intake orifi ce onto the blower and tighten two
(2) screws.
15. Reinstall the brace bar and gasket retainer bracket.
16. Reinstall the heater rear panel and the gas valve shield.
17. Reinstall the heater top panel. Take care not to damage or abrade
any wiring.
