Page 15
JXi
™
Gas Conversion / Replacement Instructions
STEP 3: Install the Air Intake Orifi ce
1. Using a short-handled screwdriver, slightly loosen the
two (2) screws from the air intake orifi ce.
2. Gently remove the original air intake orifi ce and screen from the
blower air intake (Figure 12).
Figure 12. Remove Air Intake Orifice
3. Note the exact position of the intake hoses on the old air intake
orifi ce. Remove the intake hoses from the old air intake orifi ce
an install them on the new air intake orifi ce in exactly the same
positions as they were found on the old air intake orifi ce.
4. Replace the new air intake orifi ce onto the blower and tighten two
(2) screws.
