background image

Minix780G Series                                                                                                 User's Manual

- 5 -

6SHFL¿FDWLRQV

CPU

- Supports AMD

®

 Socket AM2+ / AM2 processors: 

- AMD Phenom™ / Athlon™ 64 FX / Athlon™ 64 X2 Dual Core / Athlon™ 64 /
  Sempron™ 
- Hyper Transport Bus 5200/2000 MT/s (HT 3.0/1.0)
- Note: The board can not support 125W TDP processors. For details , please  
  refer to the CPU support list on our homepage.

Main Chipset

- AMD

®

 780G + SB700 

- Built in Radeon™ HD 3200 Graphics, DirectX

®

 10 Ready

Main Memory

- Supports 2 x 1.8V DDR2 SODIMM sockets supporting up to 4 GB of  
  system memory
- Supports Dual channel memory architecture 
- Onboard side-port DDR2 memory 
- Supports for DDR2 1066MHz/800MHz/667MHz memory modules

BIOS

- AMI BIOS, supports Plug&Play
- Supports BIOS ROM Write Protect
- Supports Advanced Power Management ACPI,STR 
- CPU temperature, Fan speed, System Voltage monitoring

Integrated Ports

- 1 x PS/2 Keyboard port
- 1 x DVI port
- 1 x HDMI port
- 1 x VGA port
- 1 x RJ45 port
- 1 x eSATA port
- 1 x COM port
- 1 x IR port
- 10 x USB 2.0 ports, USB 1.1 is compliant
- 4 x SATA ports , Maximum Speed to 3GB/s,support for SATA RAID 0,1,10 
- 1 x IDE connector, 2 x IDE devices could be connected, 
  Supports ATA 133/100/66/33

Sound

- Onboard 6-channel/8-channel HD Audio Codec (Optional) 
- Front Panel Jumper, provides stereo MIC port on front panel

Onboard LAN

- Onboard 10/100/1000Mbps compatible LAN (Optional)

Expansion Slots - 1 x PCI Express x4 slot(PCI Express 2.0)
Form Factor

 Mini ITX (170mm*170mm)

Remark

- 1066 MHz memory support is dependent on the CPU being used

Summary of Contents for Minix780G Series










































Reviews: