Minix780G Series User's Manual
- 24 -
,'('LVDEOHV5$,'IRUWKH6$7$FRQWUROOHUDQGFRQ¿JXUHVWKH6$7$FRQWUROOHUWR3$7$PRGH
$+&,&RQ¿JXUHVWKH6$7$FRQWUR&,PRGH$RVW&RQWUROOHU,QW&,
LVDQLQWHUIDFHVSHFL¿FDWLRQWKDWDOORZVWKHVWRUDJHGULYHUWRHQDEOHDGYDQFHG6HULDO$7$
features such as Native Command Queuing and hot plug.
RAID/IDE: Enables RAID for the SATA controller. (The IDE controller still operates in PATA mode.)
•
SATA IDE Combined Mode
Available options: Disabled
ˈ
Enabled
•
Combined Mode Option
Available options: SATA as primary
ˈ
SATA as secondary
•
Back to Advanced Setup Menu
Ź
2QERDUG'HYLFH&RQ¿JXUDWLRQ
Click <Enter> key to enter its submenu.
These options allow you to Enabled/Disabled for IDE,Floppy Controller, onboard LAN Control set
the addresses for Serial Port1& Port2.
•
Serial Port 1/2 Address
(QDEOHVRUGLVDEOHVWKH¿UVWVHULDOSRUWDQGVSHFL¿HVLWVEDVH,2DGGUHVVDQGFRUUHVSRQGLQJ
interrupt.
•
Onboard Lan Control
This option allows you whether enable the onboard LAN.
•
Onboard Lan Boot Rom
These items can change Boot ROM of the LAN chipset.
BIOS SETUP UTILITY
Advanced
Onboard Device Configuration
DISABLED: disables the
integrated IDE Controller.
PRIMARY: enables only the
Primary IDE Controller.
SECONDARY: enables only the
Secondary IDE Controller.
BOTH: enables both IDE
Controllers.
ĕ
Select Screen
Ė
Ę
Select Item
+- Change Option
F1 General Help
F10 Save and Exit
ESC Exit
Onboard PCI IDE Controller
Hard Disk Write Protect
IDE Detect Time Out (Sec)
ATA(PI) 80Pin Cable Detection
Onboard Floppy Controller
Serial Port1 Address
Serial Port2 Address
Serial Port2 Mode
IR I/O Pin Select
IR Duplex Mode
Onboard Lan Control
Onboard Lan Boot Rom
[Both]
[Disabled]
[35]
[Host & Device]
[Enabled]
[3F8/IRQ4]
[2F8/IRQ3]
[IrDA]
[SINB/SOUTB]
[Half Duplex]
[Enabled]
[Disabled]
v02.61 (C)Copyright 1985-2006, American Megatrends, Inc.
