Minix780G Series User's Manual
- 10 -
2.3.2 Installation of the CPU Cooler
For proper installation, please kindly refer to the instruction manuals of your CPU Cooler.
2.4 Installation of Memory Modules
This mainboard provides two 200-pin DDRII (Double Data Rate) SODIMM slots and supports
'XDO&KDQQHO0HPRU\7HFKQRORJ\)RUGXDOFKDQQHOFRQ¿JXUDWLRQ\RXDOZD\VQHHGWRLQVWDOOWZR
identical (the same brand, speed, size and chip-type) memory modules in the DDRII DIMM slots
to activate Dual Channel Memory Technology. Otherwise, it will operate at single channel mode.
To install system memory:
1. Power off the computer and unplug the
AC power cord before installing or
removing memory modules.
2. Locate the DIMM slot on the board.
3. Insert the SODIMM module at a 45 degree
angle.
4. Push the SODIMM module back towards the
board until the clips lock the module in place.
5. To remove the DIMM modules, push the two
ejector tabs on the slot outward simultaneously,
and then pull out the DIMM module.
Static electricity can damage the electronic
components of the computer or optional boards.
Before starting these procedures, ensure that you
are discharged of static electricity by touching a
JURXQGHGPHWDOREMHFWEULHÀ\
1
2
3
We suggest there should be active cooling to the chipset area in order to let the motherboard
IXQFWLRQSURSHUO\FRPSOHWHO\HQFORVHGV\VWHPHQYLURQPHQWZLWKRXWDGHTXDWHDLUÀRZZLOOUHVXOW
in chipset overheat, which is not recommended.
