Dimmer Operation
4-3
Revision 0.1 – 3 June 1999
FP12 DIMMER
USER MANUAL
4.2
Status LED
The Status LED is used to indicate fault conditions. In normal operation this LED should
not illuminate. When active this LED will either be flashing or on continuously.
1.
When the LED is flashing an over-temperature or over-voltage condition is present,
and the dimmer outputs will be off until the over-voltage or over-temperature
condition is removed.
2.
When the status LED is on continuously, one or more of the following error
conditions have occurred:
•
Over-voltage
•
Over-temperature
•
Serial data errors
•
Software failure
The dimmer outputs are active while the Status LED is on continuously.
If the Status LED is on it may be cleared by changing the setting of the bank select
switches or by switching the dimmer off momentarily.
Summary of Contents for FP12
Page 1: ...3...
