2
INSTALLATION
SHIPPING:
The Wood Show will be shipped fully assembled. The grates will be packed inside the unit,
along with the casters.
HANDLING:
The unit can be handled with a forklift with a 4000 pound capacity (larger, custom Wood
Shows may require a larger forklift). Install the casters on the unit while the forklift is available,
then it can be rolled into place.
CLEARANCE:
The unit must be installed to conform to the following minimum clearances (in inc
hes):
From non-combustible walls:
Back and sides: 0
Front: 48
From combustible walls :
Front: 48”
Back and sides:
With no upper enclosure panels: 48
With upper enclosure panels: 2
Unit to be installed on a non-combustible floor.
GRATES AND GRATE FRAME :
Remove all items packed inside the unit. If your unit has a moveable cooking surface (with
lifting wheel), carefully allign the cables on the wheel shaft while the grate frame is resting on
the firebox floor, with no grates installed. Slowly turn the wheel to begin lifting the grate frame,
taking care to ensure that the cables spool onto the shaft without overlapping. The right and left
cables should simultaneously begin to lift their respective sides. If the grate frame is not level,
lower it and begin the lift again, adjusting the cable track to ensure a level frame. Install the
grates on the grate frame.