J&R MANUFACTURING 700E, Operation And Service Manual

Page: 15 / 59

MODEL 700 - WIRE RACKS
WIRE RACKS AND HANGERS ARE SHIPPED UNASSEMBLED SO THEY MAY
BE USED WHERE REQUIRED IN THE UNIT. HOWEVER, THEY MUST BE
PROPERLY ASSEMBLED BEFORE USE TO REDUCE THE POSSIBILITY OF A
RACK JAM.
PLEASE FOLLOW INSTRUCTIONS BELOW.
1)
LOWER RACKS MUST HAVE THE FOUR (4) "NIBS" ON THEIR BOTTOM
SIDE REMOVED.
2)
THE LOWER PAIR OF HOOKS ON EACH HANGER MUST BE BENT
CLOSED AROUND LOWER RACK SIDE RAILS.
3)
UPPER RACKS MUST BE SECURELY LOCATED ON UPPER HOOKS
(DOUBLE) OR UPPER RAILS (TRIPLE) SO THEY HOLD
POSITION FIRMLY.
7