16
•
To set up the Applicator for 20” or 30” rows use the inside hole. This will set
the wheel spacing at 120”.
•
To set up the Applicator for 22” rows use the outside hole. This will set the
wheel spacing at 132”.
When shipped the light bar will be attached using holes A and B. The light bracket needs to be positioned so that the Amber light is out
past the wheel.
NOTE - When changing the wheel spacing it may be necessary to move the
Light Brackets so the Amber Light is out past the wheel.
•
For 20” and 30” row spacing use holes B and C.
•
For 22” rows use holes C and D.
A B C D
Wheel Spacing
