J&M Wireless 465 Series Helmet Headset Installation Instructions
WARNING!
Helmet speakers may not be legal in all jurisdictions. Check your local laws BEFORE using this product. J & M Corporation cannot control the circumstances surrounding the sale of this equipment, the
quality of installation, or the specific helmet into which this equipment is installed. Accordingly, J & M Corporation makes no warranties, expressed or implied, related thereto. A helmet with this equipment installed
may not protect the user from injury. The user assumes all liability in conjunction with accidents, injuries or losses of any kind arising out of the use of this product. Additionally, this product should not be used in
any way that would impair the user’s ability to hear traffic or other noises. Accordingly, the volume should be kept low or off, depending upon the circumstances.
6B. Installation Instructions
For Most Open-Face & Flip Front Style Helmets
Installation into most Open-Face or Flip-Front Style
Helmets
1. Begin by examining the ear pocket area in your helmet, make sure that
there is sufficient room to mount the speaker in each ear pocket. (It is
important to have the helmet fit and feel the same after the speakers
are mounted as it did before the headset was installed.)
Once you have made room for and/or positioned the speakers, remove
them.
See Figures 3.
2. Clean the bottom of each ear pocket with a cloth dampened with alco-
hol. Peel the backing from the supplied Velcro® pads and press them
into the bottom of each ear pocket.
3. Mount the clamp in the proper position on the left bottom edge of the
helmet so that the microphone lines up with the wearer’s mouth.
See
Figure 1.
and then tighten the clamp with the rubber friction spacer in
place.
See Figure 4.
4. Position the speakers in their proper place in the ear pockets and press
them firmly onto the Velcro® pads.
5. Using the enclosed wooden tool, carefully push the speaker wires into
the gap between the helmet liner and shell.
See Figure 5.
1
Figure
2
Figure
3
Figure
4
Figure
5
Figure
