Pairing and Operation with a Bluetooth Enabled Cell/Smart
Phone and a Bluetooth Enabled MP3 Player or Stereo Dongle.
1. Power-on the MP3 player or stereo dongle & put it into pairing mode.
Put the HS-WLS465 into a pairing mode. Both the MP3 player or stereo
dongle and the HS-WLS465 LED’s will be flashing rapidly until the two
unit’s pair and the LED’s flash at a slower rate.
2. To set the music volume, adjust the volume of the HS-WLS465 to
maximum by pressing and holding the volume-up (E) button first. Then
adjust the MP3 or music source volume that is feeding the dongle to
a volume level in the headset that is just before distortion. Then press
and hold the volume down (C) button of the HS-WLS465 to a comfort-
able listening level.
3. If you wish to pause/play the music while riding, briefly depress the
multifunction button (B).
4. If you wish to use the FM stereo radio depress the multifunction button
(B) twice rapidly.
5. To switch back to Bluetooth music again depress the multifunction but-
ton (B) twice rapidly.
6. Turn the WLS-465 headset off, then back on and into pairing mode.
Select the hands-free menu on the cell phone, go into the Bluetooth
section and search for devices. When JM_CORP_WHS_01 is displayed
on your screen and you are asked for a passkey, enter: 0000. Your cell
phone should now be paired with the HS-WLS465.
7. When receiving an incoming call, the incoming call indicator “alert
tone” will be heard in the headset speakers. If the cell phone is set
to auto-answer mode, the call will automatically be connected to the
HS-WLS465; if the phone is not set to auto-answer the multifunction
button (B) can be depressed briefly to connect the call. To reject the
incoming call, press the multifunction button (B) twice rapidly, or just
ignore the call.
8. Press and hold the volume-up (E) or volume-down (C) buttons to adjust
the phone volume during the cell phone conversation. Additional cell
phone volume adjustments can also be made on the cell phone itself,
but during actual conversation only.
9. To terminate the phone call from the HS-WLS465, depress the mul-
tifunction button (B) briefly or just wait until the party that you were
speaking with hangs up.
10. To utilize “voice command” dialing, (the cell phone must support this
feature), press the volume up button (E) twice rapidly and listen for
the voice/tone prompt from the cell phone. To redial the last number
called, briefly press the volume down button (C) twice rapidly.
11. If you wish to use the FM stereo radio, in conjunction with the cell
phone monitoring, depress the multifunction button (B) twice rapidly.
12. To switch back to Bluetooth or FM stereo music, turn back on the MP3
player or stereo dongle, and then depress the multifunction button (B)
twice rapidly.
Pairing and Operation with two or three HS-WLS465
Headset’s in the Helmet-to-Helmet Intercom Mode.
1. In this linking scenario, put the first HS-WLS465 into pairing mode by
first pressing and holding the ON/OFF pairing and intercom linking but-
ton (A) until blue and red LED’s flash rapidly.
2. Now put the second HS-WLS465 headset into pairing mode and then
press the ON/OFF pairing and intercom linking button (A) once on this
headset, at which time they will link together.
3. If you wish to link a third headset for helmet-to-helmet intercom mode,
turn off both the first and second headsets and then put the second
headset back into pairing mode.
4. Now put the third headset into pairing mode and then press the ON/
OFF pairing and intercom linking button (A) once on the third headset,
at which time they will link together.
5. Turn off both the second and third headset and then put the first
HS-WLS465 headset back into pairing mode and put the third
HS-WLS465 headset back into pairing mode and then press the ON/
OFF pairing and intercom linking button (A) once on the third headset,
at which time they will link together.
6. Turn the second headset back on by pressing and holding the ON/OFF
pairing and intercom linking button (A) for 8 seconds.
7. The first and third headsets are currently paired and two way communi-
cations are available between the two headsets. To switch from the first
and third headsets to the first and second headsets, first disconnect
the first and third headsets by pressing the ON/OFF pairing and linking
button (A) once on either the first or third headset and then press the
ON/OFF pairing and intercom linking button (A) twice rapidly on the first
headset. The first and second headsets are now currently paired and
have two way communications between the two headsets. To discon-
nect the intercom between the first and second headset press the ON/
OFF pairing and intercom linking button (A) once on either headset.
To reconnect the first and second headset, press the ON/OFF pairing
and intercom linking button (A) once. If you wanted to connect the first
and third headset instead of the first and second headsets together,
the ON/OFF pairing and intercom linking button (A) would need to be
pressed twice rapidly instead of once. The headset will reconnect to the
last headset connected by pressing the ON/OFF pairing and intercom
linking button (A) once and will reconnect to the headset not connected
to last by pressing the ON/OFF pairing and intercom linking button (A)
twice rapidly.
8. If you wish to use the FM stereo radio depress the multifunction button
(B) twice rapidly.
9. To switch back to Bluetooth music or FM stereo, depress the multifunc-
tion button (B) twice rapidly.
10. To add a cell/smart phone to headset #one, two or three in the group,
turn off all three headsets, then go thru the pairing and operation with a
cell/smart phone, individually, one at a time for each headset, then turn
back on both, or all three for complete, intercom, music & cell/smart
phone operation.
Pairing and Operation with a Bluetooth Enabled GPS
Command Center.
1. Put the HS-WLS465 into pairing mode. From the menu on the GPS com-
mand center, go into the Bluetooth section and search for “headset”.
When JM_CORP_WHS_01 is displayed on your screen and you are
asked for a passkey, enter: 0000. Your device should now be paired
with the HS-WLS465.
2. If you wish to use headset cell-phone functions simultaneously with
your GPS command center, you will need to link the cell phone direct
to the GPS unit as per the linking/operation instructions included with
your particular unit.
3. If any one of the HS-WLS465 headsets receives an incoming navigation
command from the GPS/or cell-phone call, the helmet-to-helmet inter-
com will be interrupted. Once the navigation command or cell-phone
call has been terminated from the GPS the intercom, (if active) will
return.
4. Use the volume-up (E) or volume-down (C) buttons on the headset to
adjust the music volume, navigation command volume and/ or cell/
smart phone volume levels.
5. Additional music, navigation command and cell phone volume adjust-
ments can usually be made inside the GPS command center itself, but
the flexibility of these adjustments depends totally upon the particular
brand/model of the GPS unit you are using.
6. If you wish to use the FM stereo radio, while linked to the GPS com-
mand center, depress the multifunction button (B) twice Rapidly.
Thank you for the confidence you have shown by purchasing one
of J&M’s innovative products. If you have any questions during
the installation, or require further assistance, you may call us at
1-800-358-0881 from 8:00 a.m. to 5:00 p.m. Mountain Standard
Time, Monday through Friday.
Tucson, Arizona U.S.A.
Tel (800) 358-0881
Website: http://www.jmcorp.com
E-mail: [email protected]
