GX
L E N O X
Placing Backrest in Correct position
1
2
Pivot
‘U” Frame
Pull latch upward to release
Detachment of Backrest
* Pull latch lever upward to release from recliner piston.
* As Arrow indicates, bring backrest to fold onto the seat.
* Disconnect all cables ( recliner, slider)
Fig.1
Fig.2
Fig.3
Attachment of Backrest
* On the lower portion of both side of the backrest, there are pivots (Fig.1)
* Align both pivots correctly so they rest perfectly onto the “U”pivot frame (Fig.2)
* Once both pivots sit snugly on the “U” pivot frame, align the release latch with the
Recliner piston and snap close.
Before operating the chair upon attachment, check following items to
ensure proper operation
* Figure 1: shows Pivot and “U”pivot frame at correct alignment / be sure to clear wire
* Figure 2: Close-up view of pivot and “U” pivot frame.
* Figure 3: shows correct pivot alignment.
Summary of Contents for Lenox GX
Page 19: ......
