Getting Started
XG4
User Manual
Janam Technologies LLC Version 2, September 2021
Getting Started 2—5
Turning the Janam XG4 Rugged Mobile Computer on
1. Press and hold the
Power Key
(marked red in its center)
on the top right-hand side of the XG4.
⎯
If the XG4 is being powered on for the first time,
follow the on-screen setup instructions.
⎯
When the XG4 is on, pressing the power button briefly
will suspend operation until it is pushed again.
2. When powered on, an
unsecured
XG4 will first display the
Android lock screen
. It is unlocked by swiping up on the
screen. The
lock screen
will be replaced with the
start
screen
. For information about securing the XG4 with a
password or pin code, refer to Chapter 3.
3. When powered on, a
secured
XG4 will also first display the
Android lock screen. Swipe up to get to the
pin code
keypad
. Enter your pin code. Once the correct pin code has
been entered and you’ve tapped on the check mark, the
welcome screen
with the
pin code keypad
will be replaced
with the
start screen
. For information about securing the
XG4 with a password or pin code, refer to Chapter 3.
Unsecured: just swipe
up
Secured: enter pin, then swipe up
Both ways get to the start screen
