Getting Started
XG4
User Manual
Janam Technologies LLC Version 2, September 2021
Getting Started 2—3
Installing and removing the XG4 battery
To release the XG4 mobile computer’s battery, press and hold the left and right battery looks together
with one hand, and then use the other hand to lift the battery out of its compartment.
To install the battery, insert the top first at an angle, then firmly push it down into the battery com-
partment until you hear it clicking into place.
Changing the battery
Before removing or replacing a battery pack, power down the device or press the Power key to put
the XG4 in Suspend Mode.
Charging the XG4 battery
The XG4 ships with the battery charged. However, before first use, charge the battery for a minimum
of four to six hours.
To charge the battery using the supplied
DC Power Adapter Kit
:
1. Attach the appropriate plug adapter to the DC power adapter.
2. Connect the supplied USB Type-C cable to the power adapter..
3. Plug in the Type-C connector into the USB port on the left side of the XG4.
4. The Power LED on the right side above the display will turn red while charging and will change
to green when fully charged.