background image

When the water reaches the set temperature, the heater will turn off automatically.

13. Timer Set Button. 

Press Time button, LED display shows 

.  

Each pressing increases the time by 5 minutes.

14. On/Off Button. 

After powering on, the LED displays 

 which is the default time as shown 

in picture, and the unit is ready with the normal working status. Press On/Off button once and 

the cleaning starts. The cleaning stops when the timer counts down to 

. If the unit needs 

to be stopped before the timer runs out, press On/Off button.

15.   Hours/Minutes – Solution Usage Timer Set Button. 

Each time that   button is pressed, the timer is 

increased by 20 minutes. For example, 

 indicates that the solution is  set to be used for 1 hour and 20 

minutes. The maximum time that can be set is 9 hours 59 minutes.

16.   - Decreasing Button.  

a. When Time is used, each pressing reduces the timer by 1 minute. 

b. When Temp is used, each pressing reduces the set temperature down to the next level. 
c. When    h/min is used, each pressing reduces the solution set time by 20 minutes.

17. Heater Button. 

Pressing heater button,   flashes, indicating the heater is turned on. To cancel heating, 

press heater button again,   dims, indicating the heater is turned off.

12

COMMON CLEANING METHODS

Only tap water is needed.

Suitable Locations:

Metal decoration and jewellery makers, optical labs, 

biology / chemical labs, Medical instrument cleaning 

rooms, dental clinics, homes, speech therapy clinics, 

kindergartens/nursery schools.

Cleaning Method:

1. Add warm water to the cleaning tank to a level between 

“MIN” and “MAX” lines and above the area to be cleaned.
2. Put the items to be cleaned inside the basket and put 

the basket inside the tank.
3. Turn the power switch on. Press Time button to set 

the timer to 5 - 10 minutes. Press On/Off button to start 

cleaning.

Notes on using the basket:

 

1.  The basket reduces the friction between the items and the tank, but a plastic basket absorbs about 

30% of ultrasonic energy and reduces the cleaning effect.

2.  During cleaning, dirt will come off like smoke and the water will become murky over time.  

When “smoke” stops coming, the cleaning is basically done.

 REGULAR CLEANING

500

400

300

200

100

Summary of Contents for ULTRA 8060




















Reviews: