55
Ultra 8050D-H
Ultra 8050D-H
OPERATING INSTRUCTIONS
Open the lid. Place the items to be cleaned on
the tray (supplied) and place the tray in the tank.
Add water in the stainless steel tank, ensuring
that the items and tray are covered but the water
level is between the "MIN" and "MAX" marking.
Do not exceed the "MAX" marking on the inside
of the tank.
HOW DO I USE THE ULTRA 8050D-H CLEANER
NEVER OPERATE THE UNIT WITHOUT WATER IN THE CLEANING TANK
- DAMAGE MAY OCCUR
NEVER USE BOILING WATER - DAMAGE MAY OCCUR
1
To avoid the possibility of scratches from
friction during operation, do not overlap
items. Ensure items are spaced apart.
2
Close the lid. Ensure your hands are dry, and
plug the detachable mains cord into the unit (as
shown), and into the wall socket.
When the unit is plugged in, the display will
default to the '3 minute - 180 second' setting. If a
different time is required then pressing the SET
button will cycle the time through the five settings
180s - 280s - 380s - 480s - 90s. When the
display shows your required time, move to next
step.
Press the ON button to start cleaning. The green
operation LED will illuminate while the unit is in
operation. The built in timer will count down the
time automatically.
When the timer counts down to the unit
will automatically stop. If required you can stop /
pause the cleaning process at any time by
pressing the OFF button, pressing ON again will
resume the cleaning and the countdown will
continue. When cleaning has finished, you can
repeat the process by pressing ON button again.
Note : During operation the unit will "buzz", this is
normal.
3
Summary of Contents for Ultra 8050D-H
Page 1: ...USER GUIDE...