13
When cleaning is completed, unplug the power cord,
remove the lid and retrieve the items. Pour the water out
through the pouring recess. Clean and wipe the tank dry.
5
CARE AND MAINTENANCE
Do not turn on the unit without water in the tank.
Even though the unit is designed with multiple protections, if it is turned on
for over 30 seconds without water in the tank, it may damage the unit or
severely reduce the life of the unit.
If heating over 3 minutes, it will damage the heater.
This unit is equipped with a thermal cutoff. If the cleaning function
is turned on without water in the tank, the temperature will
rise continuously. The thermal cutoff will be activated after
approximately 15 minutes to ensure safety. The unit will be disabled
until it is repaired.
Do not run the unit for extended time or continuously.
The unit is designed with overheat protection. If the unit has been running
for 45 minutes, it is recommended to stop the unit for about 20 minutes
to prolong the life of the unit. Always disconnect the unit from the power
source when not in use.
Do not keep water in the cleaning tank for a long time.
After cleaning is completed, unplug the power cord and pour the dirty
water out through the pouring recess. Avoid getting the water inside the
housing through the vents and causing damage.
Do not spray water over the housing.
Use a towel to wipe the tank and the housing dry.
Do not expose the unit under direct sunshine for a long time.
Keep the unit in a dry, cool and ventilated area.
Summary of Contents for ULTRA 8051
Page 2: ......
