Debris accumulated over a long period of time, greasy or
heavily soiled.
Suitable Locations:
jewellery makers, homes, automotive
repair shops.
Cleaning Method:
1. Put the items in the cleaning tank directly. Do not put the
items on top of each other to avoid rubbing during cleaning.
2. Add water to a level between “MIN” and “MAX” and above
the area to be cleaned.
3. Add 20 ml (1 tablespoon) of dishwashing liquid.
4. Turn the power switch on. Press Heater button to turn on
the heater, flashes. Press the Heater button again to cancel
the heating when the water temperature reaches 40°C (104°F)
after about 20 minutes.
5. Press Time button to set the timer to 10 minutes. Double press On/Off button to start cleaning. Grease will
dissipate and appear to be like black smoke in the water.
6. Clean the tank and add fresh water. Wash the items for another 3 minutes to remove the residual debris
and any detergent.
ENHANCED CLEANING
Warm water and dishwashing liquid can soften grease and
improve cleaning efficiency.
SPECAL CLEANING WITH SEACLEAN2
Silver, copper or brass items with oxidation which has
darkened the items will need special cleaning.
Suitable Locations:
jewellery stores, homes, shooting clubs.
Cleaning Method:
Put the items onto the plastic tray and then
in the tank, add water to a level between “MIN” and ”MAX”
and above the area to be cleaned.
2. Add special solution (SeaClean2) that can remove silver
or copper oxidation according to the ratio recommended
(typically 1:10), Use special solutions according to the
instructions for brass cartridges.
3. Turn the power switch on. Press Heater button to turn on the
heater, flashes. Close the lid. Press the Heater button again
to cancel heating when the water temperature has reached
50°C (122°F) after 30 minutes. ( dims, indicating the heater
is turned off).
4. Press Time button to set the timer to 15 minutes.
5. Press Function button to select the degas function.
button illuminates. Double press On/Off to start
degassing. After 90 seconds it changes over to normal cleaning automatically.
6. When cleaning is done, remove the basket and the items. If there are larger quantities of items and some
debris remains, add 5 minutes and repeat cleaning.
7. Change the water and wash the items for 3 minutes in plain tap water to remove the residual chemicals.
When the water temperature reaches 60°C (140°F), the heater
will turn off automatically. To ensure safety, the heater will also be
turned off automatically after being turned on for 45 minutes.
During cleaning, debris will come off the items like “smoke”. Water will become murky. This method will
remove silver or copper oxidation and debris in the decorating patterns and crevices and make the
items like new again.
Summary of Contents for ULTRA 8051
Page 2: ......
