Jameco Electronics 132214, User Manual

Page: 14 / 55

Chapter 2 - Before You Get Started
Pre-Hardware Installation Checklist 7
Verify and Record Your ISA I/O Card’s IRQ and I/O
Address Jumper Settings
Before installing your ISA I/O Card, confirm which IRQ and
I/O Addresses are available on your system. If the default
jumper settings on your card match available IRQ and I/O
Addresses in your system, you are ready to insert the card
into an available ISA bus slot. If the default jumper settings
are already in use on your system you must reset the con-
flicting jumpers on the card to match available IRQ or I/O
Addresses. Please record these settings in the following ISA
I/O Card Jumper Settings Table for reference during soft-
ware installation.
Serial
Port No. IRQ
Jumper
Setting I/O
Address Parallel
Port No. IRQ
Jumper
Setting I/O
Address
S1 P1
S2 P2
S3 P3
S4
S5
S6
S7
S8