Jamara Fokker DVII, Instruction

Page: 15 / 28

15
CANOPY ASSEMBLY
Place the vacuum formed engine on the canopy and use 2.6 x
8mm tapping screws to secure it in place.
Completion of the canopy.
Place the machine gun decal, F38 plastic tube, F39 balsa barrel,
and F40 combinations on the working table.
Insert the F38 into the F39 barrel. Use instant glue to secure the
F39 onto the F40. Place a straight rule on top of it; make sure the
top of the machine gun is straight.
Apply the decorative sticker on the barrel.
Color the pilot as the flyer like.
Secure the F38 inside the barrel. Apply the decorative sticker on
the front of the barrel. Use scissors to remove the excess sticker.
Color the muzzle and trigger into black.
Colored pilot for reference. (It is available in the ARF version.)
Apply the decorative sticker on both sides of butt.
Place the machine guns inside the slots on the canopy and use
2.0x6mm tapping screw to secure them in place.
Place the pilot inside the pilot seat. Use 2.6x8mm tapping screws
and 3x10mm washers to secure the pilot in place.
Don‘t screw too tight.
Apply the black sicker around the butt.
The top view of the machine guns on the canopy.
Completion of the canopy.