13
Charging
1 Insert plug in AC outlet
2 Connect the battery with charger
3 Remove the battery after a full charge
When starting to charge, insert the plug to the socket first and
then connect the charging/discharging connector (not included).
Please pay attention to the charge condition during the charging
process. After charging,disconnect the battery and charge
connector (not included). Overcharging or charging the battery
improperly may cause dangerous overheated situation.
If battery’s temperature exceeds 45° please stop charging imme-
diately.
In order to get optimum efficiency please do not charge the bat-
tery immediately after use. Please wait until the battery cool off,
which helps to extend its lifetime and performance.
1 Battery
2 Gyro
3 Servo
1
2
1
2
3
3
End of Installation
Summary of Contents for E-Rix 450
Page 18: ...18 Notes...
Page 19: ...19 Notes...