7
23. 1.5 mm balsa strips are glued to the edges of the sides.
24. This pieces is sanded later on as well. Therefore lay out frame
1 and 2 with 4mm balsa.
25. Cover with 1.5 mm balsa.
27. Lay 6 mm balsa on the tail and only glue the front side to the
bulkhead. Equally so the end of fusealage from 6 mm balsa.
The gross form is secondary here, as the parts get their shape
by grinding.
26. It is recommended to apply a dummy empennage made of
4 mm balsa left overs before hand. It is only fit and reomved
later on. It will help you to correctly fix and determine the
empennage parts.
28. The tail incl. dummy empennage sanded.
