6
halved.
do not position the machine in areas exposed to direct sun light or hot air.
In order to keep the temperature of the installation room within the field of values mentioned above, it will
be necessary to install a system for eliminating dissipated heat (the value of the kcal/kW/B.T.U.
dissipated by the UPS is indicated in the paragraph "SPECIFICATIONS ”).
The following methods can be used:
natural ventilation
;
forced ventilation
, recommended if the exterior temperature is lower (e.g. 20°C) than the
temperature at which you wish to run the UPS (e.g. 25°C);
air conditioning system
, recommended if the exterior temperature is higher
(e.g.s.30°C) than the
temperature set for running the UPS (e.g.s.25°C).
PRELIMINARY OPERATIONS
CHECK THE PACKING CASE
When you receive the UPS check that the packing case has not
been damaged during transportation.
Check that neither of the two anti-shock devices fixed to the
packing case has become red. If this has happened follow the
instructions given
on the packing case.
Be careful when removing the packing materials so as not to scratch the UPS cabinet.
The equipment must be handled with care as it could be damaged if it is dropped or banged.
The UPS is delivered with:
guarantee
user instruction manual
battery fuses (if battery are present).
POSITIONING
You should bear in mind the following points when positioning the UPS:
a space of at least one metre must be kept in front of the machine to leave plenty of room for
maintenance operations.
a space of at least 20 cm. must be left between the back of the UPS and the wall so as not to block
the flow of air from the fans, and at least 40 cm. for maintenance operations on the fans.
no objects must be placed on the top of the machine.
The AC-DC INPUT/OUTPUT cables may enter from the bottom or from the back of the UPS.
MOVIMENT AZIONE CON IMBALLO / HANDLING WIT H PACKING
1000
RIMOZIONE DEL PALLET / TO REMOVE THE PALLET
1000
