6
machine and be dressed before being balan
ced.
A balancing arbor No. 2013 is supplied as
standard equipment.
Dressing the Wheel
The wheel could be dressed from the table
by the diamond no. 1989 in the holder no.
2024 mounted on the magnetic chuck; the
diamond should be placed approx. 1" to the
left of the wheel center.
The diamond is passed across the wheel by
the hydraulic continuous cross-feed.
A Hydraulic wheel dresser for wheel head
mounting is supplied as optional equipment
(see page 28). The lever 818 controls the
direction and the knob 817 controls the
speed of the cross-feed.
Grinding Wheels
The machine is furnished with a general
purpose wheel.
The wheel manufacturers will give advice
in selecting the right type of wheel for any
particular job.
The wheel size :
Diameter 10"; max. width 1½"; hole 3".
The speed is 2300
R.P.M.
