Jain Technology XONIC-100P, User Manual

Page: 4 / 37

Preview
Introduction
Xonic-100P Clamp-On Ultrasonic Flowmeter is fully digital, state-of-art flowmeters using DSP (digital signal
processing) technology to measure time difference of ultrasonic signals. Please read this manual carefully
and make installation. Xonic 100 will keep best accuracy.
Safety Consideration
Installation Steps
Select best point for transducer installation
1. input GENERAL DATA
2. select CHANNEL
3. input PIPE DATA
4. select LIQUID TYPE
5. do INSTALLATION
6. select FLOW UNIT & TOTAL UNIT
7. select DATALOGGER
Specifications
Type Clamp-On Ultrasonic Flowmeter
Priciple Transit-Time
Measuring
Pipe Size 1
5
~ 6000 mm
Upstream 10D, Down stream 5D (single path)
Upstream 7D, Down stream 3D (dual path)
Transducer -40 ~ +120
℃
(Flow, Total, Velocity, Delta T, Oscilloscope Shape)
Temperature
Flow Computer -20 ~ +60
℃
4
Accuracy ±1.0% (single path),±0.5% (dual path)
Flow Velocity
±
0.02 ~
20
.0
m/s
Turn-Down Ratio
10
00:1
Repeatability
±
0.25%
Required Straight
Run
Xonic-100 use inner batteries and AC
85
~2
6
4
V
. 50/60Hz.
power
adapter
. So please consider about safety
and any damage to flow computer during installation. Especially, many application is near moisture place,
so please be careful any electric shock.
Data Input Two 4~20mADC
for Temperature , Pressure .etc.
Data OUTPUT
Communication
Two 4~20mADC for flow
(load max
750
ohm)
Two
Ralay for Total
RS-232C
Power Battery with
85
~ 2
64
VAC
. 50/60 Hz.
power adaptor
Enclosure NEMA 4 (IP6
7, Rain Proof)
Transducer NEMA 7 (IP68, Water Proof)
Cable Standard 10 m. (Option max 200 m.)
Data Logger
32
Mbytes (above
1,0
00,000
data
)
Display Graphic Color LCD