Jain Technology XONIC-100P, User Manual

Page: 14 / 37

14
Section 5. INSTALLATION
For proper installation, please read this section carefully. Just after you input pipe and liquid data, you
can start installation very easily. Xonic 100 is clamp-on flowmeters, so user can install very fast and
easily.
5.1 Select SENSOR TYPE
User must have correct transducer for your pipe. Xonic 100 has 5 size transducers and Xonic 100
will automatically recommend proper transducers for the site. If Xonic 100 recommend size XLD
type, then usr must have XLD type transducers. Choose from the list transducers you have.
5.2 Select SAMPLING CLK
Xonic 100 automatically select SAMPLING CLOCK, so user do not need change.
5.3 MOUNTING TYPE
Normally, CLAMP ON V is better for most applications. V method is more accurate and easy for
installation.
V method means installation mode which install two transducers onto one pipe side as belows.
V mode installation