Jain Technology Xonic 100 Series, Instruction Manual

Page: 36 / 47

Xonic
®
100 Series
Jain Technology
www.jain.co.kr Tel. 82-2-856-4114 Fax. 82-2-856-9503
36
8.2.1.1 Data Log –
RS-232C –
Configure –
Baud Rate
User can select the baud rate of the flow.
Caution) The value must be same with the value of user’s PC or Laptop.
8.2.1.2 Data Log –
RS-232C –
Configure –
Data Bits
Set the Databits for data logger.
8.2.1.3 Data Log –
RS-232C –
Configure –
Parity
8.2.1.4 Data Log –
RS-232C –
Configure –
Stop Bits
Set the Stopbits for data logger.
8.2.1.5 Data Log –
RS-232C –
Configure –
Line Feed
8.2.1.6 Data Log –
RS-232C –
Configure –
Network ID
User can set a ID in order to identify.
1 . BAUD RATE
2 . DATA BITS
3 . PARITY
4 . STOP BITS
5 . LINE FEED
6 . NETWORK ID
CONFIGURE
1 . 2400
2 . 4800
3 . 9600
4 . 19200
5 . 38400
6 . 57600
7 . 115200
BAUD RATE
1 . BAUD RATE
2 . DATA BITS
3 . PARITY
4 . STOP BITS
5 . LINE FEED
6 . NETWORK ID
CONFIGURE
1 . 8Bits
2 . 7Bits
DATA BITS
1 . BAUD RATE
2 . DATA BITS
3 . PARITY
4 . STOP BITS
5 . LINE FEED
6 . NETWORK ID
CONFIGURE
1 . NO PARITY
2 . EVEN PARITY
3 . ODD PARITY
PARITY
1 . BAUD RATE
2 . DATA BITS
3 . PARITY
4 . STOP BITS
5 . LINE FEED
6 . NETWORK ID
CONFIGURE
1 . 1Bits
2 . 2Bits
STOP BITS
1 . BAUD RATE
2 . DATA BITS
3 . PARITY
4 . STOP BITS
5 . LINE FEED
6 . NETWORK ID
CONFIGURE
1 . LINE FEED OFF
2 . LINE FEED ON
LINE FEED
1 . BAUD RATE
2 . DATA BITS
3 . PARITY
4 . STOP BITS
5 . LINE FEED
6 . NETWORK ID
CONFIGURE
_
NETWORK ID
Press [ MENU ] – 8.DATA LOG – 2.RS-232C– 1.CONFIGURE –
1. BAUD RATE
Press [ MENU ] – 8.DATA LOG – 2.RS-232C– 1.CONFIGURE –
2. DATA BITS
Press [ MENU ] – 8.DATA LOG – 2.RS-232C– 1.CONFIGURE –
3. PARITY
Press [ MENU ] – 8.DATA LOG – 2.RS-232C– 1.CONFIGURE –
4. STOP BITS
Press [ MENU ] – 8.DATA LOG – 2.RS-232C– 1.CONFIGURE –
5. LINE FEED
Press [ MENU ] – 8.DATA LOG – 2.RS-232C– 1.CONFIGURE –
6. NETWORK ID
➢
Move cursor by [

] [

].
➢
Input alphabet characters by [ F1 ].
➢
Delete characters by [ CLR ].
➢
Leave the edit mode by pressing [ ENT ].