Xonic
®
100 Series
Jain Technology
Tel. 82-2-856-4114 Fax. 82-2-856-9503
34
7.3.4 In/Output –
Relay Out [1] –
Rev
7.4 In/Output –
Relay Out [2]
Same with Relay Out [1]. Please refer to above instructions.
Input/output
–
Analog In [1]&[2]
7.5 In/Output –
Analog In [1]
User can assign each data with Analog In [1] and [2] individually to receive the data
from other devices. Which includs Current Temperature, Pressure, Liquid level and
etc.
7.5.1 In/Output –
Analog In [1] –
Set Enable
Set enable to use Analog In.
7.5.2 In/Output –
Analog In [1] –
Calibration_Min
Caution) Do NOT use this function without manufacture’s technical instructions.
7.5.3 In/Output –
Analog In [1] –
Calibration_Max
Caution) Do NOT use this function without manufacture’s technical instructions.
7.5.4 In/Output –
Analog In [1] –
Min Input Span
The input value is depending on the measuring range of user’s input device.
7.5.5 In/Output –
Analog In [1] –
Max Input Span
The input value is depanding on the measuring rage of user’s input device.
1 . OUTPUT DATA
2 . OUTPUT MODE
3 . DUTY SET
4 . REV
RELAY OUT [1]
1 . REV00
2 . REV04
REV
1 . SET ENABLE
2 . CALIBRATION_MIN
3 . CALIBRATION_MAX
4 . MIN INPUT SPAN
5 . MAX INPUT SPAN
6 . DESCRIPTION
7 . CHECK INPUT DATA
ANALOG IN [1]
1 . DISABLE
2 . ENABLE
SET ENABLE
1 . SET ENABLE
2 . CALIBRATION_MIN
3 . CALIBRATION_MAX
4 . MIN INPUT SPAN
5 . MAX INPUT SPAN
6 . DESCRIPTION
7 . CHECK INPUT DATA
ANALOG IN [1]
4. 000
MIN INPUT SPAN
UNIT: mm
1 . SET ENABLE
2 . CALIBRATION_MIN
3 . CALIBRATION_MAX
4 . MIN INPUT SPAN
5 . MAX INPUT SPAN
6 . DESCRIPTION
7 . CHECK INPUT DATA
ANALOG IN [1]
MAX INPUT SPAN
UNIT: mm
0. 000
Press [
MENU
] – 7. IN/OUTPUT – 3.RELAY OUT [1] –
4. REV
Press [
MENU
] – 7. IN/OUTPUT –
5.ANALOG IN [1]
Press [
MENU
] – 7. IN/OUTPUT – 5.ANALOG IN [1] –
1. SET ENABLE
Press [
MENU
] – 7. IN/OUTPUT – 5.ANALOG IN [1] –
2. CALIBRATION_MIN
Press [
MENU
] – 7. IN/OUTPUT – 5.ANALOG IN [1] –
3. CALIBRATION_MAX
Press [
MENU
] – 7. IN/OUTPUT – 5.ANALOG IN [1] –
4. MIN INPUT SPAN
Ex)
➢
If the measuring range of transmitter is fro
m 0 to 500mm. Then, the minimum input
span is “0”.
Press [
MENU
] – 7. IN/OUTPUT – 5.ANALOG IN [1] –
5. MAX INPUT SPAN
Ex)
➢
If the measuring range of transmitter is fro
m 0 to 500mm. Then, the maximum input
span is “500”.
Press [
MENU
] – 7. IN/OUTPUT –
4.RELAY OUT [2]
Summary of Contents for Xonic 100 Series
