JAI TS-2030EN Series, User Manual, Page: 38 / 64

EN Camera Series
28 Connectors and Cables
Note: Make sure that the unused leads are not touching and that there is no possibility that exposed
wires could cause the leads to short.
5.3.3 Building Your Own Power Cable
Refer to the 12-pin connector pin-out in Figure 14 on page 35. Connect the Ground lead to pin #1,
and the +12V DC lead to pin #2 of the 12-pin connector. Power must be DC-regulated, and of
sufficient current to properly power the camera.
5.3.4 Attaching the Power Cable to the Connector
The 12-pin connector is keyed and will only fit in one orientation. Follow these directions to
properly attach the power cable to the camera connector:
1. Rotate the connector while applying slight pressure until the keyways line up.
2. Press the connector into place until firmly seated.
3. Plug the power cord into the 100V AC socket. This will power the camera up.
5.4 Attaching the Camera Lens
The TS-1327EN camera accepts 2/3” or larger format size C-mount lenses. The TS-2030EN/TS-
2076EN camera accepts 1" or larger format size C-mount lenses. To attach the C-mount lens to the
camera, carefully engage the threads and rotate the lens clockwise until it firmly seats on the
mounting ring. Do not force the lens if it does not seat properly. Please note that some lenses with
extremely long flangebacks may exceed the mounting depth of the camera.