JAI TS-2030EN Series, User Manual, Page: 27 / 64

Tutorial 17
EN Camera Series
If you set the POST trigger filter to 10ms but the TTL trigger has only 9ms stable POST condition,
then the “POST Filter Noise count” must be incremented. Unlike PRE trigger, “VINIT count” is also
incremented, because trigger pulse is sent to CCD anyway before finishing validation of POST
condition. Once FPGA invalidates the POST condition, FPGA does not generate IRQ to PowerPC.
Besides “POST Filter Noise count” and “VINIT count,” all other counters remain the same.
3.6.2 Firmware Upgrade
In the “Properties” window, right-click on the camera icon you want to upgrade. Select “Update
Firmware in Camera(s).”
You can update the five pieces of firmware inside the EN camera. Each piece of firmware has a
distinctive extension.
Table 1 Firmware Names and Descriptions
Firmware Name Description Filename conversion
EN Application Top-level application en_YYMMDDVR.app
FPGA Bit file EPGA firmware FPGA_YYMMDDVR.bit
OS Image Real-time Linux OS image vmlinux_YYMMDDVR.osi
Lib/Drv file Library and driver package libdrv_YYMMDDVR.drv
Camera Module H8 firmware 2030h8cpu_YYMMDDVR.2030
or
1327h8cpu_YYMMDDVT.1327
If you want to update multiple cameras at the same time, use the SHIFT key to highlight multiple
cameras. Then, right-click to select “Update Firmware in Camera(s).”