Software Introduction & Installation25
TMC-775/TMC-773
Figure 18.
A shortcut provides easy access to the TMC-775/TMC-773 software.
4.2
Using the TMC-775/TMC-773 Software
You must connect a camera via an RS-232 cable to the computer and power it up before starting the camera
control software.
Start the TMC-775/TMC-773 software by clicking on the Start menu, and then selecting JAI_TMC-775/TMC-773
and clicking the JAI TMC-775/TMC-773 shortcut on the right (Figure 18).
4.2.1
The Main Screen
The main screen offers several menus. Click on File in the menu bar to access the following:
Figure 19.
Main Screen File Menu
4.2.1.1
Preferences
Selecting Preferences opens a separate window that allows the user to set the COM port the camera will use to
interface with the computer. Set the port number by selecting it in the COM Port drop down list box. The system
defaults to the COM port number where the camera is attached.
In addition, this window allows you to rename the Control functions of "Zoom", "Focus", and "Iris". Thus, the
controls can be used for more general purpose functions, such as stepper motors for "Pan" and "Tilt".
Figure 20.
Set the COM Port
Summary of Contents for TMC-775
Page 2: ......
Page 13: ...Hardware Introduction 13 TMC 775 TMC 773 Figure 1 TMC 775 TMC 773 System Configuration...
Page 81: ......
