JAI TM-1402CL, User Manual

Page: 20 / 42

TM/TMC/RM/RMC-1402 Series
12 Operation
3 Operation
3.1 Camera Rear Panel (TM-1402)
3.1.1 Up/Down Switch
The Mode Selection switch works in conjunction with the Up/Down switch. Refer to Table 6 on page 15 for
information on the Up/Down switch.
3.1.2 Digital Output Connector
Refer to Section 2.2.2 (c on page 7 for information on the digital output connector.
3.1.3 Analog Output Connector
The TM-1402 camera has a BNC connector on the rear panel to output analog video data.
3.1.4 Power, RS-232, and External Sync Connector
Refer to Section 2.2.2 on page 6 for information on the power, RS-232, and external sync connector.
3.1.5 Shutter Speed Control Switch
Please refer to Section 2.2.3 on page 9 for information on the Shutter Speed Control switch. The factory
default setting to the shutter speeds is “no shutter.”
3.1.6 Mode Selection Switch
Various modes can be implemented with the rear panel Mode Selection switch. The Mode Selection switch
works in conjunction with the Up/Down switch and RS-232 external control. Commands from the RS-232
interface will override the rear panel switch settings of the camera. The table below shows details on various
modes.