JAI TM-1402CL, User Manual, Page: 16 / 42

TM/TMC/RM/RMC-1402 Series
8 Installation
2.2.5 Digital Output Cable (TM-1402 only)
25.0mm
1.00 in
20
1
19
37
16
31
17
1
Female
78.74 in (2 meters)
Male
The TM-1402 camera uses the cable 30DG-02 from JAI, Inc. as a digital output cable. This cable has a 31-pin
AirBorn connector on the camera end and a 37-pin D-sub male connector on the other end. Contact your JAI,
Inc. representative regarding availability of interface cables for specific frame grabber models. Pinout
configuration for the digital cable is shown below.
Figure 6. Pinout Configuration for Digital Output Cable
FROM 31 PIN CONN. TO 37 PIN CONN WIRE COLOR FROM 31 PIN CONN TO 37 PIN CONN WIRE COLOR
PIN 1 CLK+ PIN 1 CLK+ ORG 1RED PIN 19 FDV- PIN 22 FDV- WHT 1BLU
PIN 2 LDV+ PIN 2 LDV+ GRY 1RED PIN 20 VINIT PIN 17 VINIT YLW 1BLU
PIN 3 FDV+ PIN 3 FDV+ WHT 1RED PIN 21 VD PNK 1BLU
PIN 4 GND PIN 16 GND YLW 1RED PIN 22 NC PIN 18 NC ORG 2BLU
PIN 5 HD PNK 1RED PIN 23 GND PIN 23 GND GRY 2BLU
PIN 6 INTEG PIN 37 INTEG ORG 2RED PIN 24 D0- PIN 27 D0- WHT 2BLU
PIN 7 NC GRY 2RED PIN 25 D1- PIN 28 D1- YLW 2BLU
PIN 8 D0+ PIN 8 DO+ WHT 2RED PIN 26 D2- PIN 29 D2- PNK 2BLU
PIN 9 D1+ PIN 9 D1+ YLW 2RED PIN 27 D3- PIN 30 D3- ORG 3BLU
PIN 10 D2+ PIN 10 D2+ PNK 2RED PIN 28 D4- PIN 31 D4- GRY 3BLU
PIN 11 D3+ PIN 11 D3+ ORG 3RED PIN 29 D5- PIN 32 D5- WHT 3BLU
PIN 12 D4+ PIN 12 D4+ GRY 3RED PIN 30 D6- PIN 33 D6- YLW 3BLU
PIN 13 D5+ PIN 13 D5+ WHT 3RED PIN 31 D7- PIN 34 D7- PNK 3BLU
PIN 14 D6+ PIN 14 D6+ YLW 3RED
PIN 15 D7+ PIN 15 D7+ PNK 3RED PIN 35 GND SHIELD
PIN 16 NC NC
PIN 17 CLK- PIN 20 CLK- ORG 1BLU NC
PINS 4, 5, 6, 7, 19,
24, 25, 26, AND 36
PIN 18 CDV- PIN 21 LDV- GRY 1BLU