JAI TM-1325 Series, User Manual

Page: 20 / 40

TM-1325 Series
12 Operation
Table 6 Mode Selection Switch
Mode
Selection
Switch
Position
Mode Information Up/Down Switch Functions
0 Switch Disabled Switch Disabled None
1 Set Gain Up/Down Change Gain
2 Set Vtop (A/D) Up/Down Change A/D Ref. Top
3 Set Vbottom(A/D) Up/Down Change A/D Ref. Bottom
4 Gain Selection #1 Up: 9dB, Down: 12dB Lower Gain Selection
5 Gain Selection #2 Up: 18dB, Down: 22dB Higher Gain Selection
6 Linear LUT Up Back to Linear Table
7 Knee Selection Up / Down (Scroll) Scroll 8 Different LUTs
8 Async Reset mode Up: Normal, Down: Async Async and Normal Shutter
9 Factory Default Recall Up/Down: Recall Factory Setting
A Power Up setting Up: Recall, Down: Save Power Up Page Setting
B User Page Storage #1 Up: Recall, Down: Save User Page Storage Setting
C User Page Storage #2 Up: Recall, Down: Save User Page Storage Setting
D Direct Shutter control Up: Increment
Down: Decrement
Change Direct Shutter Speed in
1H Increments
E Scan Format2
Up: PS500L
Down: PS250L
Partial Scan 500L at 58 Hz
Partial Scan 250L at 100 Hz
F Scan Format1 Up: 30fps, Down: 15fps 30 fps, 15 fps
3.2 Camera Rear Panel (TM-1325CL)
3.2.1 Digital Output Connector (Camera Link Connector)
Refer to Section 2.2.2 (d) on page 6 for Camera Link information.
3.2.2 Analog Output Connector
The TM-1325CL camera has a BNC connector on the rear panel to output analog video data.
3.2.3 Power and External Sync Connector
Refer to Table 2 on page 5 for information on the power and external sync. connectors.