Pin No.
Input/Output
Signal
Description
1
GND
2
Power In DC In
DC 10 V ～ 25 V
3
GND
4
RESERVED
5
In
Opto In 1 -
6
In
Opto In 1 +
7
Out
TTL Out 4
Line 12
8
NC
9
Out
TTL Out 1
Line 1
10
In
TTL In 1
Line 4
11
Power In DC In
DC 10 V ～ 25 V
12
GND
Line 5
④
DC IN/TRIG connector
（
12-pin round
）
Connect the cable for a power supply (optional) or for DC IN / trigger IN here.
Note
SW-4000Q-SFP
— 9 —
The maximum current rating for the power and ground pins is 1.6A per pin pair.
If you are using a power supply whose voltage would create a current flow above
this limit in order to meet the camera’s maximum power consumption (24.8 W),
then power must be connected via both pin pairs.
TTL signal specification
TTL out signal specification (Typ.)
Output voltage
：
Low 0.0V
High 5.0V
Input/Output current
：
+/-32mA
TTL in signal specification (Typ.)
Input voltage
：
Low 0.0
～
0.8V
High 2.0
～
5.5V
Compatible connectors
Camera side : HR10A-10R-12PB
（
71
）（
Hirose Electric or equivalent
）
Cable side : HR-10A-10P-12S (plug) (Hirose Electric or equivalent
）
