JAI SW-4000Q-10GE, User Manual

Page: 49 / 67

Setting range Default value Description
RGB, XYZ, HSI RGB Set the output image format.
Off, sRGB, AdobeRGB,
UserCustom Off Set the detailed mode when RGB is selected for the color space.
ー ColorMatrixR-R Select the ColorMatrix setting component.
[Setting range]
ColorMatrixR-R, ColorMatrixR-G, ColorMatrixR-B
ColorMatrixG-R, ColorMatrixG-G, ColorMatrixG-B
ColorMatrixB-R, ColorMatrixB-G, ColorMatrixB-B
ColorMatrixValue -2.0 〜 2.0 ー Set the Color Matrix value.
[Default value]
ColorMatrixValue [ColorMatrixR-R] = 1.0
ColorMatrixValue [ColorMatrixR-G] = 0
ColorMatrixValue [ColorMatrixR-B] = 0
ColorMatrixValue [ColorMatrixG-R] = 0
ColorMatrixValue [ColorMatrixG-G] = 1.0
ColorMatrixValue [ColorMatrixG-B] = 0
ColorMatrixValue [ColorMatrixB-R] = 0
ColorMatrixValue [ColorMatrixB-G] = 0
ColorMatrixValue [ColorMatrixB-B] = 1.0
Setting range Default value Description
Configure settings for digital input/output.
Line1 TTL Out 1,
Line4 TTL In 1
Line5 Opt In 1,
Line8 TTL Out 2,
Line9 TTL Out 3,
Line10 TTL In 2,
Line12 TTL Out 4,
Line13 TTL In 3 ー Select the input/output to configure.
Line Mode Input, Output ー Display the input/output status (whether it is input or output).
Line Inverter True, False False Enable/disable polarity inversion for the selected input signal or output
signal.
Line Status True, False ー Display the status of the input signal or output signal (True: High, False:
Low).
Line Source ー ー Select the line source signal for the item selected in [Line Selector].
[Setting range]
Acquisition Active, Frame Active, Exposure Active,
LVAL,
Pulse Generator 0, Pulse Generator 1, Pulse Generator 2, Pulse Generator 3,
User Output 0, User Output 1, User Output 2, User Output 3,
Line4 TTL In 1, Line5 Opt IN 1,, Line10 TTL In 2,, Line13 TTL In 3,
Logic Block 0, Logic Block 1,
Encoder Trigger, Encoder Direction
Line Format TTL,
OptoCoupled ー Display the signal format.
ー ー Display the input/output signal status. The state is shown with 16 bits. Bit
assignments are as follows.
bit0:Line1
bit3:Line4
bit4:Line5
bit7:Line8
bit8:Line9
bit9:Line10
bit11:Line12
bit12:Line13
bit1, bit2, bit5, bit6, bit10, bit13-31 unused (fixed 0)
0 〜 1000000 step 100 Off Remove noise from the OptIn input signal of Digital I/O.
UserOutput0
UserOutput1
UserOutput2
UserOutput3 UserOutput0 Set the UserOutput signal.
UserOutputValue True, False False Set the value for the UserOutput selected in [UserOutputSelector].
Item
Color Transformation Mode
f） Color Transformation Control
ColorMatrixValueSelector
Color Transofrmation RGB Mode
g） Digital I/O control
Item
UserOutputSelector
OptInFilterSelector (ns)
LineStatusAll
Line Selector
SW-4000Q-10GE
— 4 9 —