SW-4000Q-10GE
— 15 —
⑤
DC IN / trigger IN connection cable
⑥
AC adapter (power supply) (if necessary)
Connect the AC adapter and the round connector of the connection cable to the DC IN /
trigger IN connector on the camera.
Step 3: Verifying Camera Operation
When power is supplied to the camera while the necessary equipment is connected, the
POWER/TRIG LED at the rear of the camera lights amber, and initialization of the camera
starts. When initialization is complete, the POWER/TRIG LED lights green.
Verify whether power is being supplied to the camera by checking the rear LED.
When properly turned on
Lit green
* For details on how to read the LEDs, see “LED status and camera status” in the “Parts
Identification” section.
Step 4:
Verifying the Connection between the Camera and PC
Verify whether the camera is properly recognized via Control Tool.
Connecting the Camera to Control Tool
1
Startup eBUS Player for JAI
eBUS Player for JAI startup screen appears.
Summary of Contents for SW-4000Q-10GE
Page 61: ...SW 4000Q 10GE 61 Spectral Response Wave length nm Relative Response ...
Page 62: ...SW 4000Q 10GE 62 Dimensions F mount SW 4000Q 10GE F Dimensional tolerance 0 3mm Unit mm ...
Page 63: ...SW 4000Q 10GE 63 M52 mount SW 4000Q 10GE M52 Dimensional tolerance 0 3mm Unit mm ...
Page 67: ...SW 4000Q 10GE 67 Revision Date Changes Revision history 1 0 Apr 2019 First version ...