SW-2001T-CL
42
Synchronization
By external trigger pulse, or internal clock
Operation mode
No-Shutter, Shutter-Select, Pulse Width Control (PWC)
Trigger input
12Pin : 4.0
±
2.0Vp-p
TTL or
Camera link : LVDS (CC1)
Possible to change Negative Logic or Positive Logic
Minimum trigger width : more than 1.2
μ
s(SHUTTER-SELECT) ,
1.2
μ
s(PWC)
Sync output
(open termination)
Camera link LVAL, DVAL, EEN
12Pin XEEN (Negative logic) 4.0 Vp-p (no termination)
Communication
interface
Via Camera Link connector or RS-232C (12-Pin connector)
Baud rate : 9600bps
Interface is switched by SW1 located rear panel.
Camera Link and 12P can not be used at the same time.
Power
DC +12V
±
10% 1000mA (max 1100mA)
Note: Use a power supply capable of providing more than 3A.
Lens Mount
Nikon F-Mount or
M52
-Mount
F-mount is standard and
M52
mount is an option
Maximum allowed rear protrusion on lenses:
Nikon F-Mount: 13 mm
M52
-Mount: 1
3
mm
Flange back
Nikon F-Mount : 46.5mm tolerance: 0
~
-0.05mm
M52
-Mount : 4
6
.5mm tolerance : 0
~
-0.05mm
Optical axis
Center
±
0.1mm(Max)
Sensor alignment
accuracy
Better than 0.1 pixel at center
Measured by Factory standard using
BV
f=
35mm F
2
.
8
lens
Operating
temperature
/Humidity
- 5
°
C to +45
°
C / 20 to80% ( non-condensing)
Storage temperature
/humidity
-25
°
C to +60
°
C, 20 to 80% ( non-condensing)
Vibration
3G (20Hz to 200Hz XYZ direction)
Shock
50G
Regulation
CE (EN61000-6-2, 61000-6-3)
IEC61000-4-2
Conforming to Level 4 (Note 3)
FCC Part15 Class B
RoHS
WEEE
Dimensions
90(W) x 90(H) x 90(D) mm (without connector and lens mount
protrusion)
Weight
830 g (Both F-Mount and
M52
-Mount)
Connectors
Camera Link : 10226-1A10JL x2
12Pin : HR10A-10R-12PB (Hirose) or permissible substitute
Note 1:
Exposure
rate
in
line
reduction
require
51.23us
than
longer
times
Note 2: LSB numbers shown in parenthesis is for 8 bit output.
Note 3: This is effective only when specified connector or cable is used.