SP-5000M-CXP2 / SP-5000C-CXP2
- 7 -
1.
General
The SP-5000M-CXP2 and SP-5000C-CXP2 are among the first new Spark Series cameras to be
introduced. They are high performance cameras with high resolution and a fast frame rate suitable
for high speed machine vision applications. The SP-5000M-CXP2 is a monochrome progressive scan
CMOS camera and the SP-5000C-CXP2 is the equivalent Bayer mosaic progressive scan CMOS camera.
Both are equipped with a CMOS sensor offering a 1-inch optical format, a resolution of 5.24 million
pixels, and a 5:4 aspect ratio. They provide 211 frames per second for continuous scanning with
2560 x 2048 full pixel resolution for both monochrome and raw Bayer output.
8-bit, 10-bit or 12-bit output can be selected for both monochrome and raw Bayer formats. The SP-
5000C-CXP2 is also capable of performing in-camera color interpolation at reduced frame rates.
The new cameras feature a CoaXPress interface which uses coax cable with the capability of
supplying power through the cable. The SP-5000M-CXP2 and SP-5000C-CXP2 use a dual coaxial cable
interface. A full pixel readout, partial scan readout, or binning mode (monochrome only) can be
selected depending on the application.
The SP-5000M-CXP2 and SP-5000C-CXP2 have various comprehensive functions needed for
automated optical inspection applications, such as solid state device inspection or material surface
inspection. They incorporate video processing functions such as a look-up table, shading
compensation and blemish compensation in addition to fundamental functions such as trigger,
exposure setting and video level control.
As a common Spark Series feature, a new connector for lens control is employed. SP-5000M-CXP2
and SP-5000C-CXP2 support P-iris and motor-driven lenses as standard lens control capabilities.
Factory options are available to configure this connector to support DC iris systems, as well as
provide a video iris output signal, or to provide additional TTL IN and OUT lines.
The latest version of this manual can be downloaded from: www.jai.com
The latest version of the Camera Control Tool for the SP-5000M-CXP2 and SP-5000C-CXP2 can be
downloaded from: www.jai.com
For camera revision history, please contact your local JAI distributor.
2. Camera composition
The standard camera composition is as follows.
Camera body
1
Sensor protection cap 1
Dear Customer (sheet) 1
The following optional accessories are available.
Tripod base
MP-42
Power supply unit
PD-12 series