![background image](http://html1.mh-extra.com/html/jai/sp-5000c-cxp2/sp-5000c-cxp2_user-manual_631437073.webp)
SP-5000M-CXP2 / SP-5000C-CXP2
- 71 -
Trigger mode
OFF, Continuous, Timed (EPS), Timed (PIV), Trigger Width, Timed (RCT)
(
w/ALC
)
Trigger option
Trigger Overlap ON/OFF, Long time exposure
Trigger Input Signal
Line4 (TTL in), Line7 (Trigger packet), NAND0, NAND1, SW, Pulse Generator (4),
User Output (4)
Exposure
Mode
Timed
(EPS,RCT,PIV
Sequential)
10 μs (Min.)
~
8 second (Max.),
Variable unit: 1 μs
Trigger Width
10 μs (Min.)
~
∞
(Max.)
Auto Exposure
OFF / Once / Continuous
Auto Exposure Response Speed
1
~
8
Digital I/O
Line Selector (12P): GPIO IN / GPIO OUT
Black
Level
Adjust.
Ref. level
33.5LSB 10-bit (Average value of 100*100)
Adj. range
-256
~
255LSB 10-bit
Resolution
1 STEP = 0.25LSB
Sensor Base Gain
0dB, 6dB, 12dB
0dB
Gain
Control
Manual
Adj. range
-0dB
~
+24dB
1 step=0.01%(0.005dB to 0.08dB)
Varies by setting value
-0dB
~
+24dB
1 step=0.01%(0.005dB to 0.08dB)
Varies by setting value
WB Gain
—
R / B : -7dB to +15dB, 1 step = 0.01dB
WB Area
—
4 x 4
Color Temp.
Range (Preset)
—
4600K, 5600K, 6500K
WB Range
—
3000K
~
9000K
White Balance
—
OFF, Once, Continuous
Blemish
Comp.
Detection
Detect white blemish above the threshold value
(Black blemish is detected only by factory )
Compensation
Complement by adjacent pixels (Continuous blemishes are not compensated)
Numbers
512 pixels
ALC
AGC, auto exposure, iris control can be combined and automatically controlled
Gamma
0.45
~
1.0 (16 steps settings are available)
LUT
OFF: γ=1.0, ON=256 points can be set
HDR Correction
4 settings
Level 1, 2, 3 and 4
—
Shading Compensation
Flat Field
Block Comp. (20 x 16 blocks)
Block size: 128 x 128 pixels
Flat Field, Color shading
Block comp. (20 x 16 blocks)
Block size: 128 x 128 pixels
Bayer Color Interpolation
—
3 x 3 matrix, Linear compensation
Power
PoCXP
Complies with
Input range
DC+12V to +24V ± 10% (At the input terminal)
Power consumption
490mA (At 12V input, Full pixels)
5.9W (At 12V input, Full pixels)
565mA (At 12V input, Full pixels)
6.8W (At 12V input, Full pixels)
Lens mount
C mount
Rear protrusion of the lens is less than 10 mm
Flange back
C mount : 17.526 mm, Tolerance: 0 to -0.05 mm
Optical filter
Protection glass: Not provided
IR cut filter (Half value is 670 nm)
Operating temperature/Humidity
Performance guaranteed
-5
C to +45
C / 20 – 80% (No-condensing)
Operating Temperature / Humidity
-45
C to +70
C/20% to 80% (No-condensing)