![background image](http://html1.mh-extra.com/html/jai/sp-5000c-cxp2/sp-5000c-cxp2_user-manual_631437042.webp)
SP-5000M-CXP2 / SP-5000C-CXP2
- 40 -
7.6. Trigger width mode
In this mode, the exposure time is equal to the trigger pulse width. Accordingly, longer
exposure times are supported. Additional settings determine if the trigger pulse can be accepted
during the exposure period.
Primary settings to use this mode
Exposure Mode:
Trigger Width
Trigger Mode: ON
7.6.1 If the overlap setting is “OFF”
Note: In this mode, Exposure Active signal is -2.7
µ
s against the external trigger signal.
Therefore,
the external trigger signal should be +2.7
µ
s against the required Exposure Active signal.
Fig.22 Overlap = OFF
Trigger
CMOS
Exposure
FVAL
Exposure
Active
Exposure Period
t3
t1
t2
t4
t1
t2
t3
t4
10
µ
s + 2.7
µ
s(Min) 12.2
µ
s 7.5L
~
8.5L
8.8 µs