JAI RM-2030CL, User Manual

Page: 15 / 54

GUI Features 5
TM/TMC/RM/RMC-2030CL
2.1 Operating The Control Software
2.1.1 Exposure Control
The TM-2030CL exposure control allows you to select Continuous or Trigger modes using the appropriate radio
button. Notice that Continuous and Trigger mode offer slightly different menus.
2.1.1 (a) Continuous Mode Shutter Speed
The Shutter Speed drop-down list box allows you to select the specific shutter speed for manual shutter and
Async shutter. Manual shutter speed 0 is no shutter mode; Async shutter speed 0 is Async No Shutter mode;
Async shutter speed 9 is Async no delay shutter mode (pulse width control). A = PIV fixed exposure, B = PIV
PWC. For detailed shutter information, please see “Electronic Shutter” on page 28.
Figure 6. Continuous mode operates the shutter based on the camera settings.
2.1.1 (b) Continuous mode Scan Area
“Scan Area” offers a full scan or 2x2 binning when “Shutter Speed” is set at zero. Notice the “Expo (lines)”
setting is disabled.
Figure 7. The camera offers full scan or binning.
2.1.1 (c) Programmable Shutter Speed
“Programmable” Shutter Speed is set by entering a number in the “Expo (lines)” text box. Programmable is
available in Continuous or Trigger mode. The Expo setting is used instead of the Scan Area selection.