Go-X Series Rolling Shutter GigE Vision I/F (Preliminary)
20
Step 5: Changing the Camera Settings
This section explains how to change settings by describing the procedure for changing the output
format as an example.
Configuring the Output Format
Configure the size, position, and pixel format of the images to be acquired.
The factory settings are as follows. Change the settings as necessary.
Factory default values (GOX-12409C-PG)
Item
Default value
ImageFormatControl
Width
4016
Height
3036
OffsetX (horizontal position)
0
OffsetY (vertical position)
0
PixelFormat
BayerRG8
*You can specify the image acquisition area. For details, see “
1
Configuring the Width of ImageFormatControl
By selecting Width, you can change the value as shown below.
Note
: Depending on the setting item, you need to change visibility. Please switch visibility
(Beginner / Expert / Guru) as necessary.
×
Summary of Contents for GOX-6409M-PGE
Page 72: ...Go X Series Rolling Shutter GigE Vision I F Preliminary 72 Spectral Response GOX 6409MC PGE...
Page 73: ...Go X Series Rolling Shutter GigE Vision I F Preliminary 73 Spectral Response GOX 12409MC PGE...
Page 74: ...Go X Series Rolling Shutter GigE Vision I F Preliminary 74 Spectral Response GOX 20409MC PGE...
Page 75: ...Go X Series Rolling Shutter GigE Vision I F Preliminary 75 Dimensions...
