JAI GOX-2402M-USB, User Manual

Page: 57 / 84

Setting range Default value Description
Display/configure information related to the device.
ー "JAI Corporation" Display the manufacturer name.
ー ー Display the model name.
ー See the possibilities Display the manufacturer information.
ー ー Display the hardware version.
ー ー Display the firmware version.
ー ー Display the FPGA version.
ー ー Display the device ID.
Any ー Set the user ID (16bytes) for the camera.
4:USB3Vision
1
0
1
1
0
1:UTF8
1:UTF8
0:Little 0:Little
0:Mainboard 0:Mainboard Select the area of the camera's interior for which to display the temperature
sensor's reading. (Fixed Mainboard)
DeviceTemperature(C) ー ー Display the internal temperature (°C) of the camera.
ー 0〜922337203685477580
7
(maximum value of
signed 64-bit) Display the timestamp value. Resets to 0 when the signed maximum 64-bit
value is exceeded.
ー ー Forcibly sets the timestamp's count value to 0.
ー ー
0〜9223372036854775807
(maximum value of signed
64-bit) 0
ー ー Reset the device.
(After the camera receives this command, it returns an ACK response. Then,
execute reset.)
0:Value1, 1:Value2
2:Value3, 3:Value4
4:Value5
UserDefinedValue
Display information on transport layer control.
48 〜 67109240 12288 Display the payload size. (Include ChunkData) (unit: bytes)
Sets the timestamp's count value to TimestampLatchValue.
Timestamp (ns)
TimestampLatchValue (ns)
TimestampLatch
TimestampReset
j) TransportLayerControl
PayloadSize
UserDefinedValueSelector
DeviceReset
DeviceRegistersEndianness
DeviceCharacterSet
DeviceReset
Item
DeviceVendorName
DeviceModelName
DeviceManufacturerInfo
DeviceVersion
DeviceFirmwareVersion
DeviceSerialNumber
DeviceUserID
DeviceTemperatureSelector
a) DeviceControl
DeviceFpgaVersion
DeviceTLType
DeviceTLVersionMajor
DeviceTLVersionMinor
DeviceTLVersionSubMinor
DeviceGenCPVersionMajor
DeviceGenCPVersionMinor
— 57 —
Feature Properties
Go-X Series USB3 Vision I/F