CV-A10 CL and CV-A70 CL
6.4.3. Continuous operation
For applications not requiring asynchronous external trigger, but should run in continuous
operation, this mode is used.
For timing details, refer to fig. 13. through fig. 17.
To use this mode:
Set function:
Trigger mode to “Continuous”.
TR=0
Scanning
SC=0
through
3
Vertical
binning.
(CV-A10 CL only)
VB=0 through 3
Horizontal
binning.
(CV-A10 CL only)
HB=0 through 3
Shutter mode normal, programmable or auto
SM=0 through 2
Shutter speed
SH=0 through14
Programmable exp.
PE=0 through 625
Other functions and settings
Input:
Ext. HD in on pin 6 on 12-pin connector.
(If used).
Ext. VD in on pin 7 on 12-pin connector.
(If used).
Important notes on using this mode
External sync system should follow the camera scanning system.
The ext. HD/VD phase relations should follow the shown in fig. 21.
- 17 -
