JAI CB-200MCL, User Manual

Page: 22 / 36

CM-200 MCL / CB-200 MCL
This command will load previous stored settings to the camera. 3 user settings can be stored in
the camera EEPROM. 1 factory setting is also stored in the camera. The settings stored in the last
used user area is used as default settings at power up.
Save Settings SA
This command will store the actual camera settings to 1 of the 3 user area in the camera EEPROM.
EEPROM Area EA
If received, the camera will return the last used user area number.
7.4. CM-200MCL/CB-200MCL command list
Command Name Format Parameter Remarks
A - General settings and utility commands.
1 Echo Back
EB =[Param.]<CR><LF> 0=Echo off
Off at power up
EB?<CR><LF> 1=Echo on
Camera Status
Request
ST ?<CR><LF> 2 Actual setting
Online Help
Request
HP ?<CR><LF> 3 Command list
3 digits
4 Firmware Version VN ?<CR><LF> (e.g) 100 =
Version 1.00
Camera ID
Request
ID ?<CR><LF> 5 max 10 characters
Model Name
Request
MD ?<CR><LF> 6 max 16 characters
User can save and
load free text.(16
or less characters)
7 User ID
UD =[Param.]<CR><LF>
UD?<CR><LF>
B – Shutter
1 Shutter Mode
SM =[Param.]<CR><LF> 0=Preset Shutter
SM?<CR><LF> 1=Programmable exposure
0=Off, 1=1/60, 2=1/100,
3=1/250, 4=1/500,
5=1/1000, 6=1/2000,
7=1/4000, 8=1/8000,
9=1/10000
2 Preset Shutter
SH =[Param.]<CR><LF> Available when
SM=0.
SH?<CR><LF>
PE =[Param.]<CR><LF> 2 to 1252 (CM/CB-200) Programmable
Exposure
Available when
SM=1.
3
PE?<CR><LF>
C - Trigger mode
0=Normal (Continuous)
1 Trigger Mode
TR =[Param.]<CR><LF>
1=Pre-select
TR?<CR><LF>
2=Pulse Width
2 Trigger Polarity TP =[Param.]<CR><LF> 0=Active Low
- 21 –